Amazon Echo Dot 3rd Gen Buttons

The Amazon Repeat Dot 3rd generation speaker features several buttons and a light band around its pinnacle as have its earlier versions.  Here though, we explore the Repeat Dot three buttons and input and output ports.  We testify  where each ane is on the speaker. We and so discuss what each push / plug is for, and when to press them to access the many features of this popular Amazon speaker.  Finally, we impact a bit on some of the calorie-free ring patterns you'll encounter when pressing these buttons.

Buttons on Repeat Dot 3rd Generation: Functions, Descriptions, and Locations

Volume Downward and Upwards Buttons

The Alexa Echo Dot iii speaker has ii push-button book controls on the meridian. These round depressions, with raised minus and plus symbols inside, decrease and increase the speaker volume.  Meet the volume buttons, pointed at by the green arrows in the next picture.

Amazon Alexa Repeat Dot three speaker with its Volume Upward and Downwards buttons highlighted.

Press the minus button to lower speaker volume. Press the plus button to enhance the volume.  Note that adjusting book on one speaker in this manner does non affect the loudness of any other Echo speaker on the network or in the same grouping.  Each Repeat device remembers its ain volume setting.

The light ring briefly lights up when you printing either UP or Downward button.  It glows  white and shows where the book is currently set.  The less of the band that glows, the lower the volume setting.  The more of it that glows, the louder.  See the following moving-picture show how the light band lights depending on book setting.

Amazon Alexa Echo Dot 3rd generation speaker low-cal ring, showing set up at one quarter volume.

The ring extinguishes a couple seconds subsequently the last volume button press.

The speaker lite band, showing 1 half volume. Finger setting volume.

Each press of either volume central illuminates the lite ring in white.

What the light ring shows when speaker set to full max volume.

Mic Mute / Mic OFF Button

The Alexa Echo Dot 3 speaker likewise features a microphone off / on push button. This circular push button, with a raised Cease symbol inside, mutes and unmutes the built in far field mics.  When muted, the speaker does not hear annihilation, and so, does not respond to the wake word, or any other voice command for that matter.

Run into the Mic Mute button, pointed at by the dark-green arrow in the side by side pic.

The speaker with its -Microphone Mute / Mic OFF- button highlighted.

The light ring and mute button also glow cherry to show that the unit of measurement will not hear you, as pictured next.

The speaker muted, showing its calorie-free ring and -Mic Off-On-push button glowing red.

When muted, press this button to un mute / plough on the mics once more.  One time unmuted, the cherry-red light ring goes nighttime as shown next, and the speaker once again responds to vox commands.

Top view of the speaker, showing the lite ring dark. Speaker microphones are active – not muted.

Action and Reset Push button: Buttons on Echo Dot 3rd Generation

The round Activeness button has a raised, white dot in its recessed center. We find this button at three o'clock on the Repeat Dot 3 speaker peak console, as pointed at by the dark-green arrow nosotros drew in, in the side by side picture.

Speaker top view, showing the -Action- button highlighted.

Speedily printing and release the Action button to get Alexa's attention instead of calling out her name with your voice.  Heighten her in this fashion when existence repose is required or in loud places where she might have trouble hearing you utter her wake word.

You can also reset the Echo Dot 3 to factory default settings and state by pressing and gently holding in the Action button until the hard reset happens.  Reset normally begins in five to seven seconds.

Finally, at that place is a light sensor beneath the white dot on this triple duty button.  This "electric eye" senses the ambient light shining on the speaker, and adjusts the brightness of its lite ring accordingly.  The brighter the surrounding light, the brighter the ring glows whenever it lights up.  The darker the expanse, the dimmer the light ring glow.

Echo Dot 3rd Generation Speaker Connection Ports

The Echo Dot 3 also sports a ii-hole panel, located on the back side. Hither we discover the simply two connectedness ports; the AUX Out and DC power input ports, as pictured next.

Amazon Alexa Echo Dot 3 wireless speaker, rear view, showing the Power and Audio Out ports panel.

The hole on the left is the DC power input plug.  The pigsty on the right is a 3.5mm line level sound output plug.  This supports connecting your 3rd generation Dot to your home theater system for louder music.

Well, that wraps up this summary of all the buttons on the 3rd generation Repeat Dot Alexa speaker. With these, you can access all of the speaker'south commands.  Also, the lite ring lets yous come across speaker condition likewise. Savor!

Related Posts to Buttons on Repeat Dot tertiary Generation

1. JBL Speaker Button Functions, Meanings
2. Amazon Echo Spot Buttons, Ports, Guide, How to Use, Aid
3. JBL Flip iii Buttons Layout, What Each Button Does and When to Use Them
4. Change Echo Dot Wake Word, How To
5. Where is the Reset Button on Amazon Generation ii Repeat Smart Speaker Located
6. JBL Xtreme Buttons Meanings, Push button Combinations
7. Where is the Reset Push button on the Original Amazon Repeat Smart Speaker
8. Instant Pot Buttons, Smart WiFi, By Column
9. JBL Get Buttons Guide, What Each Button Does on Go and Go 2 Speakers

References for Buttons on Echo Dot 3rd Generation

1. Echo Dot (3nd Gen) Product Page on Amazon.com

Revision History

• 2020-ten-05: First published.

Source: https://tomstek.us/buttons-on-echo-dot-3rd-generation-top/

Share this post